1 5

Raspberry Pi Case-LTRIG

Raspberry Pi X820 V3.0 SSD&HDD SATA Storage Board Matching Metal Case / Enclosure + Power Control Switch + Cooling Fan Kit customize

Raspberry Pi X820 V3.0 SSD&HDD SATA Storage Board Matching Metal Case / Enclosure + Power Control Switch + Cooling Fan Kit customize

$24.74 USD
$0.00 USD $24.74 USD
Sale Sold out

  • This case is for X820 V3.0 Expansion Board and Raspberry Pi 3B+(plus)/3B/2B/B+ ; not supportsX820 V1.3

  • The Max. compatible thickness of the 2.5" SATA SSD/HDD is 10.4mm/0.41inch. (The stander 2.5" SATA SSD/HDD is 9.2mm/0.36inch)

  • Please remove the Jumber cap when you use the power swtich to control the power of raspberry pi and X820 storage board

Packing List:
  • 1 x Metal Case (with screws) for X820 V3.0 Expansion Board & PI3
  • 1 x Power Control Switch
  • 1 x Mini Fan (with screws)

Overview:

  • This is a metal case with a super quiet fan assembly, High quality with good lacquer.

  • Easy to install, protect your X820 board and Raspberry pi board better.

  • Updated GPIO/FFC Cable Side Slot on the case

  • Updated Slot for   X735 DC power Port and X735 microusb port

  • Compatible with Raspberry Pi 3 Model B+(plus)/3B/2B/B+

  • Installation guide, please refer to: http://www.raspberrypiwiki.com/index.php/X820

What do you need to use Raspberry Pi X820 V3.0 2.5 inch SATA Storage Board?

  1. A Raspberry Pi board(Pi 3B+, 3B, 2B, B+)

  2. A Raspberry PiX820 V3.0 SSD&HDD SATA Storage Board

  3. A DC5V 4A Power Supply

  4. A 2.5 inch SATA hard disk drives (HDD) or solid-state drive (SSD)

  5. AX820 V3.0 use match metal casekit(optional)

 

 


 

 Welcome Customize Order!
View full details