PX4 PIX 2.4.8 32 Bit Flight Controller Integrate PX4FMU + PX4IO with Safety Switch Buzzer 1G SD for DIY RC Drone FPV Multirotor Quadcopter

Note:

Open source products, once sold, no return, if quality problems, Please return for repair . Does not provide one to one support. Buy carefully!

If you are using a PWM receiver, please ready a PWM / PPM converter.

Description:
- The board integrates with PX4FMU+PX4IO
- Pixhawk is with new 32 bit chip and sensor technology

Features:
- Advanced 32 bit CortexM4 ARM high performance processor, can run RTOS NuttX real time operating system;
- 14* PWM/ actuator output;
- Bus interface (UART, I2C, SPI, CAN);
- Integrated backup power supply and failure backup controller, the main controller can be safely switched to backup control;
- Provide automatic and manual mode;
- Provide redundant power input and fault transfer function;
- Color LED lamp;
- Multi tone buzzer interface;
- Micro SD to record flight data;

Interface:
- 5* UART, 1*compatible high voltage, 2*hardware flow control
- 2* CAN
- DSM/DSM2/DSM-X satellite receiver compatible input
- Futaba SBUS compatible input and output
- PPM signal input
- RSSI (PWM or voltage) input
- I2C
- SPI
- 3.3 and 6.6VADC input
- External USB MICRO interface

Package included:
- 1 x 2.4.8 Pixhawk main control  
- 1 x Flight control shell
- 1 x Safety switch  
- 1 x Buzzer
- 1 x 6pin to 6pin line  
- 1 x 4Pin to  4Pin line
- 1 x 3pin DuPont line

- 1 x 1G SD Card