Lonten Tech
Custom New Music Tesla coil SSTC product high-frequency generator ignition lightning model Integrated arc extinguishing tesla 20cm Manufacturer
Custom New Music Tesla coil SSTC product high-frequency generator ignition lightning model Integrated arc extinguishing tesla 20cm Manufacturer
Regular price
$100.00 USD
Regular price
$0.00 USD
Sale price
$100.00 USD
Unit price
per
Couldn't load pickup availability
New Vesion Musical Tesla coil SSTC product high-frequency generator ignition lightning model driver board
Attention: Only square wave music can be played, ordinary music is burned.
Now is all upgrade to New Vesion.
Use method
◆Insert the aviation plug into the base of the product first, and tighten the nut of the outer band to prevent loosening.
◆Place the discharge needle on the top of the equalizing ring of the product, and the top end of the equalizing ring can be extended by 2-3cm.
◆Lay the cable flat and straight, do not overlap or knot, try not to suspend the cable
◆Finally turn the potentiometer counterclockwise to the lowest
◆Plug the plug into the socket.
◆When the light is off, it is in music mode. In music mode, you need to keep the mobile phone or other players in the playing state, and then connect the audio port on the side of the knob with the audio port of the mobile phone with an audio cable.
◆When the light is on, it is in normal mode, you can directly turn the knob to adjust the arc size.
◆The potentiometer of the product needs to be turned to 0 before shutting down.
Note: The thimble must be installed before the power is turned on. It is recommended to use it within 3-5 minutes each time. If you play music, it needs to be within 2-3 minutes.
And must play Square music: https://www.mediafire.com/file/fe1p7domzw7f8h6/Square_ wave_ music.zip/file
Matters needing attention
Do not directly touch the mold coil or equalizing ring at any time after the product is powered on.
The product safety distance is at least 0.5m, and it is recommended to watch at a distance of 1m or more.
When opening or closing, the potentiometer must be at 0 position
