Lonten Tech

Custom Avoidance tracking Motor Smart Robot Car Chassis Kit Speed Encoder Battery 4WD Ultrasonic module For Arduino

$42.53 USD

~~$47.53 USD~~ $42.53 USD

Sale Sold out

color Four rounds kit Four rounds kit1

Quantity

Avoidance tracking Motor Smart Robot Car Chassis Kit Speed Encoder Battery 4WD Ultrasonic module

Gear motor *4
High-quality tires *4
Motor fixing part *4
100 * 213 * 5MM acrylic board *1
100 * 213 * 5MM acrylic board *1
L298N motor driver board *1
UNO328 controller board *1
sensor shield *1
Holder*1
Servo motor *1
Ultrasonic sensor Module *1
Three-channel line tracking module
IR receiver sensor
MCU remote control
Mini breadboard *1
6-cell AA battery case*1
Dupont wire *30
18650 charger *1
1M USB cable
35MM Copper bush *3
20MM Copper bush *2
6MM Copper bush *6
3MM screws & nuts *several

Parameters:

1 reduction ratio of 1:48 gear motor drive voltage 6V.

2 control motor selection L298N driver module, and MCU real isolation.

3 three groups hunt module detects black and white lines, higher accuracy, can also be used with anti-drop control.

4 infrared remote communication module, consisting of the smart car remote control system,

5 Bluetooth wireless communication module, short-range wireless remote control,

6 with economic and environmentally friendly rechargeable batteries and chargers, car power of mind.

7 increase 1602I2C display, complete the primary user interface.

Car total length 23cm, width 12cm, can access the external voltage 7 ~ 12V. And can be equipped with a variety of sensor modules for various functions to suit your imagination.

Bluetooth multi-function car kit including:
4pcs gear motor.
4pcs high quality tyre
4pcs motor fixed pieces
1pcs 100 * 213 * 3 mm plate
1pcs 100 * 213 * 5 mm plate
1pcs L298N motor driver board
1pcs uno r3
1pcs sensor extension board V5
1pcs holder
1pcs SG90 servo
1pcs ultrasonic sensor module
3pcs TCRT5000 tracing module
1pcs infrared receiving sensor module
1pcs remote
1pcs 18650 battery box
1pcs 18650 charger
1pcs bluetooth module
1pcs 40pin dupont line
1pcs USB cable
1pcs screw kit

I. Introduction:

Bluetooth multi-function car is an upgraded version of the self-walking car, and the upgraded part reflects the Bluetooth control of the Android phone

System part.

Bluetooth multi-function vehicle a single-chip learning application development system, is a 4 driving series carefully built by Keyi team

System, with atmega-328p as the core, complete line hunting, obstacle avoidance, remote control work

Can, kit contains a lot of fun programs, and can be extended to the external circuit module, thereby increasing the car

The function of use. The purpose is to enable users to get away from boring theoretical knowledge when learning microcontroller

Knowledge, in the play to obtain the ability of single-chip system development.

Ii. Parameters:

1. Reducer motor reduction ratio 1:48, driving voltage 6V.

2. L298N drive module is selected for the control motor, which is isolated from the single chip microcomputer.

3. Three groups of line hunting module, detection of black and white line, higher accuracy, can also be used with anti-drop control.

4. Infrared remote control communication module, composed of intelligent car remote control system,

5. Bluetooth wireless communication module, close-range wireless remote control,

6. Equipped with economical and environmentally friendly rechargeable batteries and chargers, the car power is worry-free.

The car has a total length of 23cm and a width of 12cm, and can access the external voltage of 7~12V. And can carry a variety of sensors

The module implements various functions according to your imagination.

Three. Introduction to experimental course

1. Application of L298N motor drive board

2. Tracking smart car

3. Ultrasonic obstacle avoidance intelligent car

4. Infrared remote control intelligent car

5. Bluetooth remote control programmable smart car

6. Four and one (line seeking obstacle avoidance infrared remote control Bluetooth remote control) multi-function program

View full details